WOYO Motorcycle LED Controller for BMW GS Motorcycle Headlight CAN Bus Electrical System Controller Spotlight Assemble

No dimming line on your light,

the controller not suit for you.!!!

Note: Due to the safe policy in some country,

the controller not support the turn signal button function!!!!

Only suit for motorcycle year of 2016/2017/2018/2019/2021/2022/2023/2024/2025

Send your motorcycle model to us after you place an order.

WOYO MLC Module for BMW R1200 R1250 F650 F750 F800 F850 F900

Plug and Play Accessory Manager, Easy to install, DIY the spotlights you like

 Control the increased brightness of spotlight by original switches of the motorcycle

Perfect For GR/Denali Spotlight

Before you purchase the order, please let us know:

Your Motorcycle Model with year(like: BMW F750GS 2023),  VIN

Take picture of the display screen or instrucment.

Description:

1.Based on the motorcycle’s CAN bus control system, utilize the original motorcycle switches to control new additional spotlights. Buttons such as scroll wheel, turn signal, horn, high beam, etc. can adjust the brightness and burst mode of the spotlights.

2. The lights will not operate when the motorcycle is not running.

3. Equipped with two adjustable lighting circuits: Main light*1, Auxiliary light*1.

    Plug-and-play design for easy installation.

4. Fashion DIY with different spotlight from your other Motorcycle people.

    Note: Depend on the type of spotlight and the connection method,

    please chat with our after-sales customer service before installation.

Note:

1. The total load power of the module cannot exceed 260W.

2. DWA & RDC Module Connect to the same position.

Perfect For GR/Denali Spotlight Assembly

(Pay attention for the dimming line model you need)

Note: If you need to connect to GR spotlight, please purchase with the GR extension cable.

(If you only purchase the MLC001/MLC002/MLC003 Module,

the package is not include the double GR extension cables.)

How to recognize the kind of dimming line?

1.Spotlight connects to power battery;

2.Turn on spotlight;

3.Use multimeter to test the voltage between the negative of the power battery and the dimming line.

If the voltage is close to the power battery voltage, it is "High level".

If the voltage is close to 0V, it is "Low level".

Before August 24, 2023, the default setting for the MLC Controller is high-level dimming,

directly compatible with GR brand spotlights.

How to change high-level to low-level dimming?

Open the side panel, Solder 2 solder joints together on the side.

Package list:

MLC module *1        3P Connector*4

Black Stopper*12     Male Female Crimp Terminal*12

(Don’t need adapter cable when you connect to Denali Spotlight)

Our conntroller doesn't support brake lamp,

support 2 sets spotlights (in total 4 lights).

Cable Module:

1.Power Supply 12V Fuse 30A (Red-Positive Black-Negative)

2.CAN BUS Red/Black/Blue/Green (Male / Female 4P)

3.Lighting circuit No.1 Blue/white/black (3P) 90W *1

4.Lighting circuit No.2 Green/White/Black (3P) 150W *1

Lighting NO.1:

Blue---Spotlight Postive

White--- PWM Adjust Brightness Wire

Black---Spotlight Negative

 Lighting NO.2:

 Blue---Spotlight Postive

 White--- PWM Adjust Brightness Wire

 Black---Spotlight Negative

It support Auxiliary lights or Fog lights, not support Brake lights.

How to use MLC module connect to your motorcycle and light?

Function for BMW spotlights Intelligent Management Module:

1. Turn on the ignition lock- ----Start the spotlights module

2. Power up--- the spotlights self-test

3. Before start spotlight:

press high beam button---- to synchronize the spotlights instant high brightness;

Press horn button ----to flash the spotlight.

4. Long press the turn signal reset button for 3s---- Turn on the first set of spotlights.

5. Press the turn signal reset button 3 times within 2s---Turn on the second set of spotlights.

6. Press the turn signal once --- to activate the dimming mode:

Roll the wheel forward ---- increase the spotlights brightness

Roll the wheel backward ----decrease the spotlights brightness

7.Quickly press the high beam button 3 times in 2s

--- tostart the spotlights flashing mode.

8. Keep the high beam button on to keep the spotlights synchronized high brightness.

When you loose it, will return back the last mode.

9. Push and hold the wheel to right way over 3s once---to synchronize the spotlights flashing mode.

10. Push and hold the wheel to right way over 3s twice ---to enter the left-right spotlights flashing mode.

11. Push and hold the wheel to right way over 3s third ---to return back to the constant light mode.

12. Quickly press the turn signal reset button three times

--- Turn off first set of spotlights.

13. Pressand hold the turn signal reset button over 3s

---Turn off second set of spotlights.

14. Reset to factory settings by turning off the turn signal.

Support Motorcycle/ Bike Model for BMW list:

MLC001 (RDC Plug)

For BMW R-Series Module:

R1250R, R1250RS, R1250RT, R1250GS, R1250GSAdv

MLC002 (RDC Plug)

For BMW R-Series Module:

R1200R, R1200RS, R1200RT, R1200GS, R1200GSAdv

MLC003 (DWA Plug)

For BMW F-Series Module:

F750GS-K80, F650(2 CYL.) -K72, F800GS-K72,

F850GS-A2K81, F850GSAdv-K82, F900R-K, F900XR-K84,

S1000R, S1000XR, K1600